Garage Door Repair Vancouver BC
Repair BC
24/7 Emergency Services
26Apr 2020

How to Select a Garage Door Service Provider

If you use your garage door on a daily basis, then it is bound to break down at some point. In other cases, it may simply need maintenance. You can choose to do it on your own if you know your way around or have an experienced person come do it for you. This may be a problem because there are so many garage door service providers that you do not even know which one to choose. Each and every one of them always claims to offer the best services. There are, therefore, some things that you can look out for when in search of a suitable garage door service provider in Maple Ridge.

Garage Door Service Provider

It is important that you do a background check first.

Do not just go for the first one you see

When searching online, you will see a lot of them. Do not go for the one in the top results. Pretty much every company you see will say that they offer 24hour service, which you are most likely to be looking for. Do not just go through their services. There are other things to look out for. These are the most important things.

Look for important information

Important information that you need to look out for is whether or not the garage door service provider has a physical address, which should be listed online. You should also check to find out if they have a valid license and insurance cover. The layout of the website will also tell if the company is official or not. Check the website and find out its design. If it is, then do not even try to contact that service provider. Google search the company and find out the reviews about it. If the company has no reviews, then it is not good. Also, be on the lookout for fake reviews. You can tell if a review is good by analyzing the review. The review ought to be descriptive. Note that not all reviews will be descriptive. If a garage door service provider has a lot of reviews, and at least 95% are positive, then it is a good garage door service provider.

Find out how transparent they are

The garage door is very important in your daily activities, and you do not want someone fixing it badly because accidents can happen sometimes, and they can be fatal in some cases. The garage door service provider should send only professionals to service your garage door. The parts they plan on using on your door should also be of quality, and they should be able to prove it. Their tools should also be sufficient to handle the job. When you ask them questions, they should answer you freely and not have any hidden costs that may catch you unaware.

The right garage door service provider will ensure the security and safety of your family and give you only the best services. They, therefore, need to have experience of at least two years.

23Apr 2020

How to Level a Garage Door

There are many problems that are associated with garage doors. As much as they are maintained, there will always be some mishaps that might require a little bit of tinkering for you to get it back on track. One of the most common cases is when your garage door is not in a level position. Not all kinds of garage doors can be leveled, though.

Garage Door Repair

The following are the steps you need to take to level garage door in Surrey.

Measure the distance

When the door is not level, there will be a gap between it and the floor. You have to measure the length of this gap. Other measurements you need to take are the diameters of the drum and the shaft.

Get new cables

Check the cables of your door. Old cables tend to stretch over time. Check to find out if they are stretched or not. If they are, then they must be replaced before any further work can continue, or else it will be a total failure.

Turn off the power

You cannot work with the power turned on because it is risky as the door may turn on by accident. Unplug the garage door from its power source. You can also deactivate the circuit breaker.

Begin the adjustments

The side you start with should be in the opposite direction to the side with the gap. To this side, rotate the drum’s screws in a clockwise direction. This is to make the screws tighter and raise the door. Turn the screws as needed, do not overdo it.

To the other side now

Get to the doors another side now and indicate the current position of the shaft together with the shaft. The mark of the shaft should always be a quarter of an inch on top of the mark of the drum. If the gap under the door is smaller or less than an inch, then make the marks to be apart by 1/8 of an inch.

Making the shaft stable

To stabilize the shaft, use a vise grip. To the top of the door, you should wedge the vise grip. This is to make sure that the drum stays as still as possible as it may spin if there are loose screws. Carefully you should loosen the setscrew and line up the two marks. You can then slowly loosen the screw and then tighten them until you get to the required point.

Assess the level

Now that you are all done, you need to do around check to find out if everything is all right. Check if the door is level. After that, you can tighten the screws remembering not to tighten them too much as the shaft may be damaged in the process. Remove the vise grip and then switch on the power to the garage door.

If you follow these procedures, your garage door should be back to its original position. Make sure to be cautious all the way.

20Apr 2020

What Affects a Garage Door Weight

If you have a garage in your home, then a garage door is something you interact with daily. These days, garage doors can be opened automatically with just the press of a button on a remote. Still, there are those that open garage doors the old fashioned way. If you open your door like this, then you have noticed that your garage door is quite heavy. If it falls on you, then your chances of making it out are very limited.

Garage Door Weight

I know that you may have wondered why garage doors are so heavy, what makes them be that heavy? In other words, what affects the weight of your garage door? Let us narrow down the things that affect how much your garage door weighs.

Type of material used to make it

Garage doors come in various types and, at the same time, are made using various materials. You may think that there are just two materials used to make garage doors because you see wooden garage doors and metallic garage doors. That is just a shallow outlook.

Let’s begin with wooden garage doors. You may find two wooden garage doors of the same size, but when you measure their weight, one of them is heavier. Why is this? As much as they are both made from wood, they are made from different types of woods. The most common wood types used to make garage doors are plywood, cedar, and redwood. These woods have different densities, meaning that they have a different mass. For every type of wood, used the door’s weight will be different even if the same dimensions are used.

For the metallic garage doors, just like there are different types of wood, there are also different types of metal used to make garage doors. After being made and painted, you may not be able to tell what kind of metal was used to make it. Different metals also have different densities resulting in different masses in the same dimensions. Some will be heavier than the others. The metallic variations include steel, copper, and aluminum.

There are other materials that also determine the weight of the garage door, such as vinyl and glass. They each have different levels of weight.

Opening mechanism

If you manually open your garage door, then you will notice a difference in weight when you compare other garage doors opened manually. Different garage door openers have different rates of performance. If you are using one of high quality, then your door will feel lighter than if using normal garage door openers.


These are the things that are attached to the garage door, such as glass windows. They affect the weight of the garage door to a small extent. It depends on your choice.

When searching for the right garage door type for you, you should always consider the type of material used to make it because it will determine how heavy your garage door will be.

17Apr 2020

How To Replace A Garage Door Lift Cable

Garage doors are used daily, and as we all know, wear and tear are always in effect. At some point, your garage door is going to break down in its use. It is, therefore, important that you be prepared for any situations that may occur. One of those situations is when the garage door lift cable breaks. You will need to know how to replace it. Follow these steps in order to replace garage door lift cable in Coquitlam. To do this, you also have to replace the springs.

Garage Door Lift Cable Replacement

You have to be cautious all the way to avoid hurting yourself. If you can’t, then get a professional to do it for you.

The following are the things you need to get the work done:

  1. Clamps
  2. Adjustable wrench
  3. Wrench set
  4. Winding bars
  5. Socket
  6. Safety glasses
  7. Rags
  8. Locking pliers
  9. Hammer
  10. Cordless drill
  11. Leather gloves
  12. Lift cables
  13. Bottom brackets
  14. Torsion springs


  1. Lock the door down and clamp it to the track. This helps in preventing the door from shooting up, which may result in you breaking your nose.
  2. With the winding bar, loosen the spring that is not broken.
  3. With the two winding bars, loosen the spring that is not broken.
  4. Remove the bolts and nuts then disconnect the spring at the center of the brackets.
  5. With the locking pliers, lock the torsion tube in position.
  6. Remove the old springs and slide the torsion tube over. Make sure to start on the left side and carefully slide the torsion tube to the right for you to be able to remove the eardrum of the cable and slide off the old spring from the tube.
  7. Take all the necessary measurements and determine the parts you need to buy. The measurements include the diameter of the wire and the broken spring.
  8. On the left side, install the new spring, after assembly, hang the bearing on the bracket.
  9. The new center bearing, install it, and then to the bracket, you connect the stationary cones.
  10. This is where the cable, which is the main topic, comes in. In this step, you have to replace all the brackets at the bottom, the lift cable, and the rollers.
  11. Run the cable of the lift straight up between the doorjamb and rollers.
  12. Make the drums tight; make sure to lock the torsion tube in place using the pliers to avoid accidents. The torsion on both sides has to be equal if the door is to open evenly.
  13. With the recommendations of the spring’s supplier, wind them.
  14. Lengthen the springs by stretching them.
  15. The very final step is the lubrication of the spring.

Taking a look at all the procedures involved, it may take hours for you to complete this task. It will be cheaper, safer, and less time consuming if you hire a professional to do it for you.

14Apr 2020

Sliding Garage Door, Is It a Good Idea

With the very many types of garage doors available, finding the right garage door type for you can turn out to be a challenging task. Putting all the other garage door types aside and focusing only on the sliding garage doors, let’s find out if it is really worth it for you.

Sliding Garage Door Repair

To determine whether sliding doors are really a good idea, we need to determine what they need to be installed and how they function.

Sliding takes up a lot of space

Sliding garage doors in Langley are generally large and take up a lot of space because they literally have to slide over and out in a way similar to an overhead door. If you are planning on installing it in your garage, then you are going to have to ensure your garage door is big enough otherwise to deal with having less space. A room has to be created for the door to slide in. A sectional, sliding garage door generally requires more width on both sides for the accommodation of the panel’s width. In some scenarios, garages do not have enough space, and no expansion is possible, which makes it unsuitable for small garages. If you are considering a sliding garage door, then you have to consider the space available in your garage first.

They may need to attest two garage door openers

It depends on the type of sliding garage door you have selected. Some types require more than one garage door opener to open smoothly. Using one opener is possible but will not be beneficial to you because it can fail at any moment. The fact that sliding doors have two panels is what makes them require the two openers for the movement of both panels. The more openers you need, the more money you have to spend, which will not be suitable for you if you are on a tight budget.

They are better equipped to handle garages with low ceilings

This will be a disadvantage to you if you have a high ceiling, but if your ceiling is low, then you are all good. The ceiling will appear shorter than usual when a garage door is suspended a few inches below it, which makes the sliding garage door the best fit for this kind of situation.

Sliding garage doors open easily and faster

As the name suggests, they slide, which makes opening them a simple task for you. With automatic garage door openers, the door should open fast enough for you. All you need is to oil the moving parts every once in a while, and you are all good. They can also be locked in various ways depending on the one you find most suitable for you.

They are more secure

The motion of the door is held and controlled by the running track, making them secure. They are also resistant to wind and high impact force.

Finally, are sliding garage doors a good idea? I say it all depends on your needs.

11Apr 2020

How to Install a Garage Door

Fixing a new garage door should be handled as an emergency as buckled doors may expose your home or garage to security threats. Installation of garage doors should be taken seriously, and manufacturers’ procedures followed succinctly.

Garage Door Installation

Attach weather-stripping

This is the first step towards the installation of a garage door in White Rock. Weather-stripping is essential to your garage door as it provides an adequate grip between the door and jamb as well as protecting your house from by providing airtight insulation. Set the panel in the doorway and drive nails into each jamb at an angle in order to wedge the door in place during installation. Attach the hinges if they are not in place.

Assemble the necessary pieces

Following the manufacturer’s manual, assemble the tracks, rollers, and lock systems. Having all these materials assembled together makes the process shorter as time is not wasted in search of missing parts once the installation process has begun.

Install the rollers and brackets

Replacement rollers are always available in a local store and come with a simple do it yourself guide. While fixing the rollers, be sure to check the roller tracks as well. Slip the vertical tracks onto the rollers of all the door sections and confirm that they are properly fixed as per the manufacturer’s recommendations.

Fasten the hinges

Using a power drill with a screwdriver tip, fasten the hinges on the first section of the door. Inspect the nuts and bolts to ensure this hardware is kept tight. Regular opening and closing of doors may loosen or cause the nuts and bolts to shift. When this happens, the door hinges, roller track brackets, or door trims and frames will become loose over time and reduce the efficiency of the door. When efficiency is compromised, door workability consumes more time and energy, and this may result in lost income or even accidents in your garage. Ensure these door components are tightly fitted at the installation stage.

Install the third section

While checking the door for level and the vertical track for plumb, tighten the top plates to the jamb. Ensure the screws penetrate deeply into the door frame as the door will exert more pressure while in operation. This ensures the door does not get ruined easily after a short period of operation. Attach the door jamb brackets, install the curved and horizontal tracks. Once this is done, use a level to check the horizontal track for level. Fit the last door section and remove temporary nails.

Test your door

Conducting these tests helps you identify problems with your garage door installation, and thus the problems can be resolved earlier before they cause injury on you or a family member.

For doors with automatic reversal systems, conduct monthly checks on the door reversal system to ensure it works properly. You can do this by placing an object on the doorway or holding the bottom of your garage door while it closes. If the door fails to halt and reverse quickly, adjust the force setting to a lighter number, or engage a professional in case you notice an irregularity.

8Apr 2020

How to Install a Garage Door Safety Cable

Garage doors are home components that are always in operation and, therefore, constantly exposed to wear and tear. They are a safety feature of the garage door running through the torsion springs and does the heavy lifting of the door every time it comes up or goes down. The cable also works as a backup just in case the spring fails. This way, it prevents violent spring recoil and prevents any damage or injury to the door or any property. The cables can sometimes slacken and come out of the track, or if the tension is too high, they can snap and fall off.

Garage Door Safety Cable

Worn out cables must, therefore, be replaced as a form of maintenance activity. However, installing garage door cables is not a difficult task. If you are that person who is comfortable with wires and cables, your basic experience is enough to assist in the installation of new cables without involving an expensive garage door technician. Those processes must, however, be procedural and follow certain prescribed processes. Before attempting cable repair, find out the cause and kind of damage and follow the following steps.

Step 1 – Avail the required tools and materials

Installing the cables and adjusting the door springs certainly require certain tools and materials. You need to gather all the required tools prior to beginning the process in order to avoid running up and down once you begin the process.

Step 2 – Wrap the cables

Having provided all, you need to begin the process. Take the pulley-guide and wrap the cables on them. Make sure the cables are extending on either side to allow for easy connection with the ceiling as well as the track. Always close the garage door before routing the cables. This way, you will be able to tighten them adequately using your screws.

Step 3 – Attach the cables

The door bottom has slots for attaching the cables. Attach the cables in the slots making sure that the cables rest comfortably on the track of the door. Remember that if the cables do not rest on the track properly, then the whole installation process will flop. Once this is confirmed, attach the other ends on the overhead setting. This is done by unscrewing or losing the screws before fixing the cables in it. Once this is done, use a screwdriver to tighten the screws back and make sure the cables attain the necessary tension to reduce wear when the door is in operation.

Step 4 – Installation troubleshooting

Once the cables are installed, you should attempt to operate the door by opening and closing carefully to check if the door operates normally. You should begin by confirming that the cables are resting properly on the track, as mentioned earlier. Also, check that the cables are not too short and have the most appropriate tension. It is advisable to have a longer cable as this can be easily repaired in case of an issue. It is vital to keep the cables free from the accumulation of debris by avoiding the use of heavy lubricants, which may attract dirt.

5Apr 2020

Reasons to Upgrade Your Garage Door Spring

Improving your home value or appearance depends on your key needs as a homeowner. Maybe you are just interested in the aesthetic value you get from an improved home appearance, or maybe you are interested in reselling your home and want it to fetch a bit higher cost than it would with an old face. Garage door springs are an imperative component of your garage door and greatly affects the way it rolls up and down and even the force with which it moves. This is important as the spring bears a high force that may not be friendly to you and your family or even pets in case of a faulty spring. It is, therefore, an important step to upgrade your garage door spring as this gives you a lot of advantages at home. A few reasons you should consider before upgrading your garage door spring are discussed here.

Garage Door Spring Repair

Increase the resale value of your home

Your home’s resale value is dependent on a number of factors. Some of these factors are within your range of control, while others are not. Upgrading your garage door spring greatly improves your door workability and efficiency. This makes it roll up and down with amazing motion and with minimal noise. This makes the door easier to operate and therefore improves your home safety. This is highly likely to increase the resale value of the house and even the home itself.

Higher return on investment

Before investing in a new garage door spring, you have to consider if this decision is a smart one or not. A smart investment plan is one that requires lower costs, maintains its value, and gives you a good value in the long run. This means you have to weigh the cost of the spring and the benefits it is likely to generate.

It’s already clear that upgrading your garage door improves your home value. It is, however, important to consider testing whether upgrading your garage door spring alone will improve your home value, or should you consider a whole garage door replacement.

Reduce energy costs

Homeowners understand how costly operating your household can be. This is why homeowners are considering reducing their monthly bills. Improving your monthly bills is one way of reducing your monthly bills. One key way is by improving energy efficiency at home.

An old door spring may be one culprit raising your home energy utilities. Upgrading the garage door spring will greatly improve your door’s energy consumption by reducing wastages resulting from old inefficient garage door springs.

Reduce your home maintenance costs

Routine repair and maintenance on garage door springs will cost you more than twice the cost of a new door spring. It is, therefore, important that you consider upgrading your garage door spring as early as you notice an irregularity with its operation. This will greatly reduce your home maintenance costs.

Improve home security level

Old garage doors with old technology may not be generally safe. This is because old garage doors may not lock safely and may have worn out garage door springs. New garage door springs will give you the home confidence you deserve all seasons.

Your home family safety should also be one of your top security priorities. A worn-out spring may snap any time, causing the door to land dangerously on you, your family member, pet, or even property. Upgrade the spring to reduce your annual hospital costs.

2Apr 2020

Reasons to Upgrade Your Garage Door Opener

Garage doors are very important parts of homes, and homeowners are beginning to realize they should maintain and even possibly upgrade the garage doors just as they do to other exterior and interior doors. Some homeowners even use their garage door as entry doors, making them even more important to the family and friends as well as visitors. This means that the garage door opener must be kept in good working condition as long as the garage door is going to remain underuse. For this reason, maintaining home safety and convenience demands that the garage door opener be kept in good working condition through routine repair or replacement to upgrade the machine.

Garage Door Opener Repair

Any machine and equipment are usually capable of elongated operation as long as it is well taken care of. Garage door openers are similarly able to remain operational even much longer than their manufacturer’s expected lifespan as long as they are used responsibly and are put under routine checks and maintenance. However, older opener models, especially those manufactured in the 90s, lack upgraded features such as those that improve the functionality of your garage door opener. Such openers may require replacement in order o upgrade their functionalities.

A few reasons that justify why you should upgrade your garage door opener are discussed below.

Improved home security

Older opener machines use a set of remote codes to control door operations. However, modern door openers use a rolling code feature. This code keeps changing as long as the door is opened and may, therefore, not be copied by intruders. It, therefore, offers improved home security compared to the traditional openers, which can easily be manipulated by intruders leading to security issues.

Safety upgrades

Traditional garage door openers did not have security measures such as photosensors. Modern garage door openers are well integrated with these features, making them safer. The openers are fitted with photo sensors making them able to detect the presence of obstacles such as pets and children. When these sensors identify an object, the door opens back, preventing or reducing the chances of accidents and injuries to family members and even pets.

Less noise

The modern door openers are quite silent. The belts and jackshafts are quieter compared to the older chain operated openers.

More convenience features

Upgrading your door opener makes it easier for you to access the latest technologies such as Wi-Fi and Bluetooth. This means you are able to monitor and control your garage door from anywhere using your handheld smartphone.

Battery backup

Old traditional garage doors did not have any power backup features. This means that without power, the door would remain closed or open, exposing you to security issues and inconveniences. Upgrading to modern models makes it possible to open and close the door with or without power.


With the upgrade, you are now able to choose from a variety of opener options.


Modern garage doors come with alarm and timer features allowing you to set or program the garage door to close after or at a particular time. This option is very important as you can be sure that the door is always closed and secure.

30Mar 2020

How to Maintain Garage Door Cables

Garage door cables are a key garage door feature that must be carefully maintained and protected from regular repair. A few tips on how you can be maintained are provided by this article.

Garage Door Cables Repair

Tighten the hardware

A garage door is constantly on the move as it opens up and closes every day. This exposes the garage door cables to constant pressure and tension. The hardware of the door also loosens up and exerts additional pressure on the door and door cables. Tightening up these parts makes the door more stable and protects the cables much better.

Look and listen

Take your time whenever you use the garage door to observe carefully and listen to the door as it moves up and down. This way, you are able to listen to strange noises and even notice irregularities in the door motion. Does it operate silently? Are both sides of the cables symmetrical? Any irregularities noticed should be handled with care, and a professional technician should always be involved to repair or replace the garage door cables.

Test the balance

Ensuring that the garage door is properly balanced is one key step towards ensuring that the door cables will work optimally, and the door itself will operate more efficiently. The strain caused by the imbalance on springs and cables makes the general operation of the door less effective. If this happens, it should be left to a professional to rectify as attempting a self-repair may be dangerous.

Lubricate moving parts

Coat the overhead sprigs with lithium grease regularly to increase the lifetime of your garage door. This also helps to keep the garage door cables and other door integrals in good condition as there is no damage caused as a result of the poor operation from other door parts.

Constantly check the cables

Always check for broken strands and damages, especially near the bottom roller bracket. These damages will always occur as the door is in operation as may also be caused by neighboring parts, as already discussed in step five. However, self-repairs should never be tried as these cables are high tension and are very dangerous to handle without prior skills. In case of damages, a professional technician should be brought on board to assist with repairs or replacement.

Clear the tracks

Always check to ensure there are no foreign objects on the tracks. Debris and other objects will knock the garage door and expose it together with other components such as cables to damages. They may also warp or get misaligned, causing stress on the door cables. This way, you will identify and correct possible problems that may end up ruining your door cables and the general functionality of the garage door.

Groom the door

Always remember that your garage door is a very important home feature and makes up to one-third of the exterior of your house. Keep it fresh and clean! If you do not have time to do this regularly, call a garage door professional to schedule a fine-tuned service. This way, you’ll keep your garage door cables under check and thus keep them working effectively for longer.