The Purpose of Garage Door Lubrication
Lubrication of garage doors is one of the most important aspects that the door owners should not take lightly or look down upon. Technical know-how is required to ensure it is done correctly and to ensure it serves the intended purpose effectively. By correctly here, we mean the use of the correct lubricant, applying it to the designated part of the garage door, doing it in the right way, and at the required time. Below we shall discuss the importance of lubricating various parts and the general purpose of lubrication.
Let’s look at few facts experts advocate for; Use Silicone or White Lithium for lubrication purposes for garage doors repair in Surrey. WD-40 is not recommended. Cleaning to remove dust and dirt should be done. The frequency of lubrication varies; for instance, rollers, hinges, springs, and tracks require lubrication after every three months. Rails may only require lubrication once a year. It is to not limited to only such frequencies, but when the need arises and this can be detected through squeaking and grinding sounds.
Lubrication acts as a barrier between the rollers and the track hence preventing the screechy and unpleasant noise that could otherwise be produced. The protective barrier aids in the smooth functioning of the garage door. When the rollers are not lubricated for a long time, the up and down motion is hindered, and with time it will have a general effect on the entire system.
Lubrication of the hinges should be done at their pivot points. This is to make work easier in terms of raising and lowering the door. Lubricating ensures the door bends easily and exerts little pressure on other parts, hence high-level flexibility.
Tracks do not necessarily require lubrication, but they should be kept clean to ensure the rollers run smoothly. As the rollers move, they tend to do this for you.
It should be well lubricated to allow easy turning lest you will break the keys, and you will be locked out of your own garage. To avoid extra expenses of repairs after a break-in and key replacement, lubrication is necessary.
Lubricating of torsion springs will require that it is done from time to time.
A spring that is not lubricated will produce noise that is different from that produced from tracks. The probability of a torsion spring to snap is high when it is dry, and its consequences are fatal if it happens in someone’s presence. To avoid noise, fatal accidents, and to ensure the garage door works practically well, lubrication is very important.
Basically, lubrication is important to ensure the parts of the garage door last long, they work efficiently, they do not produce irritating sounds and finally to avoid unnecessary accidents. To ensure all these work out well for your own good and that of the garage door, ensure you use the correct lubricant, do the lubrication in the correct way, and at the required frequency.